Structure and Characteristics:
The plate and shell heat exchanger adopts advantage of plate heat exchanger, meanwhile making up for shortcoming of shell and tube heat exchanger. The oval transfer plate combine with shell distribute the stress evenly to be more suitable for operation under changing temperature. At the same time, to provide compact size, high efficiency, high temperature resistance and so on.
Features of Plate and Shell Heat Exchanger:
1. High Heat Transfer Efficiency
2. Corrugation plate generates turbulent at a low flow velocity, and overall heat transfer coefficient is 3000 w/m2 – 6000 w/m2﹒℃. (4 – 5 times higher than shell and tube heat exchanger)
High Pressure Resistance:
The fully welded structure of plate and shell allows the maximum working pressure up to 100bar.
Plate and Shell Heat Exchanger
High Heat Transfer Efficiency
As it is fully welded and not use gasket, the available temperature is 600℃ (up to 900℃ ).
High Economical Efficiency
The compact size results to low cost, less installation area. And it does not need replacing gasket because of its fully welded type.
Application Range:
|
Minimum
|
Max
|
Heat Transfer Area (m2)
|
0.3
|
1500
|
Design Temperature (℃)
|
-50
|
500
|
Design Pressure (Bar)
|
Full Vacuum
|
60
|
Application Code
|
ASME, KS, JIS, BS, PED, ML
|
Plate Material
|
SS304, SS316L, 254SMO Nickel Alloy, C-276 , Titanium
|
We are plate and shell heat exchanger manufacturer, designer, distributor and servicer in China. The heat exchangers are widely used in the HVAC, cooling, power, metallurgy, chemical, food, electronics, marine, and environmental industries. Our products have been exported to Asia, the Middle East, and Eastern Europe, such as Russia, Ukraine, Poland, Indonesia, Thailand, UAE, Qatar, Saudi Arabia, Pakistan, Bangladesh, Mongolia, India, Iran, Jordan, Venezuela, Macedonia, Singapore and Vietnam. If you need, please don't hesitate to contact us.